Trademark Flooring Consultants, LLC

Products

We are pleased to offer a selection of TYPE OF PRODUCTS.

Magic Oil

Oil-wax combination that produces an open, breathing and diffusive surface finish. Due to its wax content, a uniform matte, velvet-like surface is achieved. With Pall Oil 2 component, the hardener component provides a very rapid setting process. This rapid drying allows renovation work to be completed in the shortest time, even in heavy wear areas (catering areas, hotels, places of business, offices...) with no reduction of its resistance to mechanical wear and chemicals after drying overnight. Its high, cross-linked density gives a water and dirt repellent surface that cannot be achieved with one-component wood flooring oils. Dirt removal is similar to finished wood flooring. Maintenance costs are comparable with those for finished wood flooring.

Especially suitable for the surface treatment of:

sanded heavy-duty wood flooring, including wood plank
heavy-duty wood blocks
suitable for use on radiant heat

+ trowel or roller application
+ fully cured after approx. 12 hours**
+ shorter renovation time is possible

* Consumption can vary according to the absorbency and surface condition of the wood or wood flooring to be treated.
** The drying time may vary strongly depending on climatic and surface conditions.

Important Note:
In the event of contact of this product with pads or textile materials, there is the risk of spontaneous combustion! Therefore, thoroughly dampen contaminated cloths, pads, etc. with water and keep/dispose in tightly sealed containers and store outside.

Sanding dust from oxygen-cured systems is self-igniting. Risk of fire! On completion of sanding work, any dust produced must be thoroughly wetted and disposed in tightly sealed containers!

Pall-X 96

Water-based, one-component wood flooring finish for heavy wear wood flooring with good resistance to heavy mechanical wear and chemicals. Pall-X 96 forms the surface finish in our rapid system, due to its rapid drying time.

Especially suitable for the surface treatment of:

sanded wood flooring
residential and commercial applications
on radiant heat
show-wood in interior decoration

	Allbase

	One-component, alcohol-based sealer suitable for use with all wood flooring finishes. Pallmann Allbase provides a barrier on wood containing oils, resins and pigments and in the renovation of oiled or waxed flooring. Especially suitable for the surface treatment of: sanded wood flooring all types of wood, including fully sanded pre-finished wood flooring + ready to use + rapid drying + spreads easily + virtually no grain raise

	Pall-X 98

	Water-based, two-component wood flooring finish for heavy wear wood flooring with excellent resistance to heavy mechanical wear and chemicals. Especially suitable for the surface treatment of: sanded wood flooring heavy commercial application show-wood in interior decoration + excellent filling capacity + rapid drying

Pall-X 340 Sealer

Water-based, one-component sealer, with strong grain enhancement.

Especially suitable for the surface treatment of:

sanded wood flooring
on radiant heating systems
wooden structures in interior decoration

+ ready to use
+ rapid drying

	UZIN PE 480

	Two-component Epoxy Moisture-Barrier Epoxy resin sealer as a damp-proofing barrier on substrates with high moisture levels Saves moisture-testing on cement-based substrates; no measurement costs Shortens the waiting time on ”green” substrates Uses: For mineral leveling compounds and mortars As a barrier against extremely high moisture levels on moisture resistant surfaces Restriction-free damp-proofing on maximum residual moisture Properties: Very heavy-duty performance Water and solvent-free Good filling capacity due to high viscosity Optimum bond even on damp surfaces Interior and exterior use
	Price: $00.00

	UZIN PE 414 Turbo

	Polyurethane Primer/Moisture Barrier Very low emission, one-component, polyurethane primer/ moisture barrier Features and benefits: One-component, no mixing = minimized waste Strengthens the surfaces of problem substrates saving time and cost of possible extensive repairs One to two hour dry time allowing adhesive to be applied in the same day Low VOC’s = environmentally friendly Creates non absorbent surface, increasing coverage rates with UZIN adhesives Intended Uses: For mineral leveling compounds and mortars as a primer as a surface enhancer as a barrier against residual moisture in cement-based substrates up to 7 lbs. Calcium Chloride Test (a 2-coat application is required) Interior and exterior use Properties: Heavy-duty performance Water and solvent-free Excellent penetration Low viscosity EMICODE EC 1 - Very low emission

	UZIN MK 97

	One Component PU Wood Flooring Adhesive Solvent- and water-free, highly flexible adhesive for wood flooring Multipurpose applications, ready to use, reliable Does not promote swelling of the wood even with moisture-sensitive woods and formats Uses: For solid shorts wood flooring For multi-ply plank flooring On cement and calcium sulphate screeds and concrete On plywood On UZIN insulating underlays suitable for wood flooring In domestic and commercial locations Properties: Good ridge formation Fast grab, yet adequate working time Strong but flexible adhesive ridges Reduces stresses between wood flooring and subfloor Adhesive contamination on wood flooring can be removed Universal applications Interior use Solvent-free, no hazard labeling * if applied with a B11 trowel EMICODE EC 1 - Very low emission

	UZIN MK 95

	One-Component PU Wood Flooring Adhesive Solvent- and water- free, hard-elastic adhesive for wood flooring Wood flooring can be sanded after 24 hours – rapid setting and grab saves time due to fast completion Uses: For solid shorts, mosaic and multi-ply planks For solid boards On substrates with adequate strength On UZIN insulating underlays suitable for wood flooring For re-adhering de-bonded surface layers For sealing radial air-cracks (wind cracks) Properties: Adhesive residues can be removed from the wood surface Does not cause swelling of the wood Rapid grab yet adequate working time Hard-elastic adhesive ridges Solvent-free

	UZIN NC 172

	Rapid Leveling Compound Fast installation of floor coverings. Rapid drying, self-leveling cement flooring compound for almost all locations and substrates and any thickness Very rapid drying, can even be used without sealer, fast and cost-effective High-strength, withstands (almost) any loading Uses:* For high quality, fast smoothing and leveling work prior to all types of installations On new substrates, e.g. cement screeds Complete renovation in one day On existing substrates in need of renovation* Properties: Sets rapidly Easily applied No thickness limitations Interior use only Cement- and chromate- free